CarScope Pro

Warrantly terms

Information about our warranty here

If you have further questions,
please don't hesitate to contact us

PC Based Wireless 4-channel Automotive Diagnostic Oscilloscope

CarScope Pro is а system specially designed as a reliable and easy to use tool primarily for automobile service professionals. It consists of a PC program in combination with a suitable hardware device.

Use of CarScope Pro is both quick and easy. Simply select the sensor, actuator or ignition circuit that’s going to be tested and the software automatically loads the required settings and gives you full details of how to connect the CarScope Pro, along with advice on how the waveform should look like and general technical information on the component or the system being tested.

It is also important to note, that the CarScope Pro is a high efficiency ignition analyzer. Ignition waveform test function can be used to test the primary and secondary ignitions. Their waveforms are displayed in a single cylinder waveform and a parade waveform. It can be used to test all kinds of ignition systems.

Important: CarScope Pro is free from USB connectivity problems, common for most automotive oscilloscopes.

Networking Standards IEEE 802.11 b/g
Wireless Frequency Bands 2.412 – 2.484 GHz
Network Protocol TCP/IP Ad-Hoc Mode
Operating Mode Slave to a host computer
Oscilloscope Inputs 4 Inputs; F0E6C8±20 Volts; 1MΩ in parallel with 30 pF
Secondary Ignition Inputs Any input channel (capacitive pick-up clamp)
Primary Ignition Inputs Any input channel (20:1 attenuator)
Input ranges (full scale) ±0.5V; ±1V; ±2V; ±5V; ±10V; ±20V
Input Overload Protection ±200V DC+AC peak
Trigger Source Channel 1, Channel 2, Channel 3 and Channel 4
Trigger Type Automatic, Single Shot, None
Trigger Edge Rising edge, Falling edge
Maximum sampling rate 2 independent 1 mega-samples/sec ADCs
Power sources Vehicle Battery (isolated)
External AC/DC Converter
Power supply range 8V to 36V DC
Power consumption 350mA max
Dimensions Approximately 135mm (w) x 40mm (h) x 195mm (d)
Weight (main unit) Approximately 0.4kg
Weight (basic set) Approximately 0.8kg

  • 4 – Channel Oscilloscope
    CarScope Pro is a universal oscilloscope and it is not bounded to any brand or any model car.

  • Comprehensive Engine Analysis
    CarScope Pro is the single solution to all your engine analysis needs. It’s designed with excellent opportunities to test all types of sensors and actuators used in modern cars.

  • Ignition Analyzer
    CarScope Pro is a high efficiency automotive engine analyzer. It is specially designed for automobile test and analysis of ignition systems. Ignition waveform test function can be used to test the primary and secondary ignitions. Their waveforms are displayed in a single cylinder waveform and a parade waveform. It can be used to test all kinds of ignition systems. It can be used to test ignition systems with or without distributor, and obtain ignition peak voltage, spark voltage and spark duration.

  • Engine Analyzer
    With the additional Pressure Pulse Sensor, CarScope Pro can be used for indirect checking of the engine’s mechanical condition.

  • CarScope Pro – main hardware unit;
  • Universal main probe - 1 piece;
  • Universal probes - 3 pieces;
  • Power supply cable;
  • Setup CD with the program;
  • TP-Link Wireless N USB Adapter (optional) - optional;
  • 2.5mm DC Plug Power Supply Adapter - optional.
Operating System Windows XP, Vista, Windows 7, Windows 8; 32-bit / 64-bit
Computer Processor 1.5 GHz (XP), 2-GHz 32-bit / 64-bit or better
Computer Memory (RAM) 2 GB memory or higher
Screen Resolution 1280×800 pixels or higher
Free Hard Disk Space 100 MB
Wireless Wi-Fi Network Adapter Compatible with IEEE 802.11 b/g standard
Menu