Common Rail Injector Tester (CRIT100)
Warrantly terms
Information about our warranty here
If you have further questions,
please don't hesitate to contact us
The Common Rail Injector Tester drives all kind of solenoid and piezoelectric injectors
The Common Rail Injector Tester (CRIT100) provides the right driving signals and parameters needed for proper assessment of the following injector parameters: delivery, back leak, injection quality, spray pattern, chattering, pre-injection and etc.
- It drives all Bosch, Denso, Delphi solenoid injectors, as well as the piezoelectric types (Bosch and Siemens):
- Initial high voltage drive for Bosch and Denso solenoid injectors;
- Low voltage drive for Delphi solenoid injectors;
- High voltage drive for Bosch and Siemens piezo injectors;
- It has the needed settings for injector opening according to the test plans. Allows setting of the following injector driving parameters:
- Pulse width;
- Test duration (number of pulses, stroke);
- Can generate a single pulse with a predefined pulse width;
- Can measure the active resistance of all solenoid Common Rail injectors and valves. Measuring range is 0.05ohms÷10ohms;
- Can measure the inductance of all solenoid Common Rail injectors and valves. Measuring range is 10µH÷10mH;
| Number of simultaneously connected injectors | 1 |
| High voltage drive for initial opening of Bosch and Denso solenoid injectors | 70V |
| Low voltage drive for Delphi solenoid injectors | 12V |
| High voltage drive for Bosch and Siemens piezo injectors | 160V |
| Pulse width | 160µS÷2000µS with 50µS steps |
| Test duration (number of pulses, strok) | 200÷4800 |
| Injector drive frequency | 1.66Hz÷40Hz (100rpm÷2400rpm) |
| Power supply | 220÷240V 50/60Hz from mains |
| Maximum solenoid injectors drive current | 30A |
| Maximum piezo injectors drive current | 15A |
| Resistance measurement | 0.05ohms÷10ohms |
| Inductance measurement | 10µH÷10mH |
| Indication | LEDs indicate the current selected mode |
| Display | Large 20×4 LCD display |
| Dimensions | 230mm x 205mm x 80mm |
| Weight | 2kg |
- The Common Rail Injector Tester is used in specialized diesel automotive repair shops for testing the injectors work and assessing their reliability. It provides the proper driving signals to the injectors according to the test plans;
- It is used together with the Common Rail Pump Driver;
- Common Rail Injector Tester CRIT100 – main unit;
- Female 2 PIN terminal block – 2 pieces;
- Female 3 PIN terminal block for resistance and inductance measurement – 1 piece;
- Various injector test plans;
- Power supply cable;