Pressure Pulse Sensor

Warrantly terms

Information about our warranty here

If you have further questions,
please don't hesitate to contact us

It offers a fast and accurate method to diagnose engine problems. Used to verify the mechanical condition of the engine before using a scan tool.

Since 2004 a worldwide use of the so called Pressure Pulse Sensors – PPS in automobile diagnostics started.

In normal operation of internal combustion engines pulse waves of pressure are generated in various systems. All engines produce such waves and their shape is predictable. All engines produce a predictable pattern of these pulses so any change in shape or appearance of asymmetry of these pulses indicates a problem with the engine. PPS detects such faults as burnt valves, bad injectors and other performance problems without major disassembly of the engine. To visualize the waveform of the output signal of PPS, its electrical part is connected to an oscilloscope (motortester; automotive scope). The screen will show in real time the work of valves, cylinders and injectors, and by using synchronization to the first cylinder it can be determined by its performance which cylinders has a problem. The automechanic can therefore quickly and accurately get an idea of the actual condition of the engine. Pressure Pulse Sensor does not need additional external power supply and it can be used with most modern digital storage oscilloscopes (motortester).

Pressure Pulse Sensor we can observe the waveform of:

  • Pulsation of exhaust gases in the exhaust;
  • Changes in the gas pressure in the inlet manifold;
  • Fluctuations in the membrane pressure regulator of the fuel;
  • Crankcase gases and other;
  • Pressure Pulse Sensor Operating Manual
Min. Pressure
0.2 bar (-0.8 bar in vacuum)
Max. Pressure
4.5 bar absolute pressure (3.5 bar atmospheric pressure)
Minimum conversion rate*
1 Hz
Maximum conversion rate*
5000 Hz
Output signal type
Voltage pulses
Output range
±0.5V; ±1V; ±2V; ±5V; ±10V
Power supply
Not needed
Electrical connector
BNC 50 ohm connector for RG58 cable
Pressure connector
6mm (1/4 inch) bronze hose nozzle
Weight (main unit)
Approximately 0.1 kg
Weight (basic set)
Approximately 0.4 kg
  • Pressure Pulse Sensor;
  • BNC to BNC cable – 2m cable;
  • 2m hose;