USB Isolator

Warrantly terms

Information about our warranty here

If you have further questions,
please don't hesitate to contact us

USB-to-USB Isolator protects your PC or Laptop while connecting USB peripherals wired to high voltages

USB-to-USB Isolator protects your PC or Laptop while connecting USB peripherals wired to high voltages. This small, industrial- grade isolator is very easy for use and provides a high-voltage barrier for protection against surges, noise and ground loop errors. It is suitable for use in sensitive applications like the automotive measurements.

This compact, USB 2.0 compliant port isolator provides a high-voltage isolation barrier between the computer and the connected USB device. The isolation protects the equipment from electrical over-voltages and transient voltage spikes. It also eliminates ground loop currents flowing between the PC and USB device which can cause damage and inaccurate measurements. Additionally, isolation minimizes conducted noise from static discharge, magnetic fields and radio frequency interference.

Ditex USB isolator is USB bus powered and can provide 5V/400mA for supplying your USB device with built-in isolated DC-DC. This is possible when the isolator is connected to a high power USB host port.

  • Ultra Compact
  • Self-powered through the USB port
  • Bidirectional communication
  • Fully USB 2.0 compatible
  • Full speed data rate 12 Mbps
  • No drivers or configuration required
  • Uses standard USB Type A and Type B connectors
  • Isolated power supply in device through a DC-to-DC converter
  • Output short circuit protection
  • Short-circuit protection for D+ and D- lines
  • USB and power supply isolation 1000V DC between primary and secondary side
  • Isolates and protects a USB peripheral from a USB host
  • Robust isolating housing with countersunk USB ports against direct touching




USB speed
Full speed, 12 Mbps
Electrical Isolation
1000V DC, 1 min duration, primary to secondary side
Isolated power supply
400 mA max available on secondary port
Output Short Circuit protection
Momentary (1 sec)
Ambient temperature operation
-20°C to 50°C
Dimension
L55mm x W30mm x H25mm
  • USB peripheral isolation
  • Automotive
  • Industrial
  • Lab

Two low resistance USB 2.0 cables are needed to use Ditex USB Isolator

Menu