PDS500X Pressure Transducer Kit
Warrantly terms
Information about our warranty here
If you have further questions,
please don't hesitate to contact us
In-cylinder pressure testing for finding serious engine mechanical defects
This Advanced Pressure Diagnostic kit allows you to monitor the engine’s dynamic pressure and vacuum and thus access its performance.
It’s designed for all auto repair shops and diagnostic specialists who would like to observe the engine absolute pressure diagram in real-time.
You will be able to find serious mechanical defects in the tested cylinder or the whole engine, find whether an extra air is entering the cylinder, detect clogging of the exhaust ports, reduced exhaust valve lift, or restricted exhaust.
Introduction Video of the Advanced In-Cylinder Pressure Transducer Kit PDS500x
 |
Pressure Diagnostic Transducer PDS500x |
| The Pressure connection thread type is G 1/4 female... |
|
|
|
Dual function cable |
|
Power supply – Two “crocodile” type clips. |
|
|
|
Precise compression adaptоr for PDS500X |
|
Optional: Used with the appropriate spark plug adaptor... |
|
|
|
Main compression adaptor for PDS500X |
|
Compression hose - ideal for hard-to-reach cylinders... |
|
|
|
Adaptor M10 x 1.0 short reach |
|
For cars with spark plugs with M10x1 mm short thread |
|
|
|
Adaptor M14 x 1.25 short reach |
|
For cars with spark plugs with M14x1.25 mm short thread |
|
|
|
Adaptor M14 x 1.25 deep reach |
|
For cars with spark plugs with M14x1.25 mm long thread |
|
|
|
Adaptor M16 Ford Triton |
|
Optional: Must be used with the Main Compression Adaptor - compression hose (Product Code: 3005) or with the optional Precise Compression Adaptor for PDS500x (Product Code: 3110) |
|
|
ATTENTION: Selected adaptor must have the same thread size and to be no longer than the tip of the spark plug you are replacing. While using a shorter adaptor than the spark plug you are replacing may produce results that are slightly low using one that is longer will damage the engine!!! |
|
|
|
Spark plug grounding clip adaptor |
|
For spark plugs with M14x1.25 mm and M12x1.25 mm threads... |
|
|
|
Thread adaptor G 1/4 male to 1/8-27 NPT female |
|
For quick couplers such as Foster 2 series |
|
|
|
Thread adaptor G 1/4 male to R 1/8 female |
|
Necessary if other quick couplers with 1/8"-28 BSPT conical thread are used |
|
|
|
Thread adaptor G 1/4 male to G 1/8 female |
|
Needed when using quick couplers |
|
|
|
Thread adaptor G 1/4 male to G 1/4 male |
|
Connect the PDS500x sensor's pressure input to various fuel pressure gauge kits instead of their gauge |
|
|
|
Thread adaptor G 1/4 male to 1/4"-18 NPT male |
|
Connect the PDS500x sensor's pressure input to various fuel pressure gauge kits instead of their gauge |
|
|
|
Mini industrial quick coupling adapter |
|
Male connector model 5150L 1/8 Camozzi... |
|
|
|
G 1/8 BSP Female Mini Quick Coupling |
|
Quick Coupling Push-on for pneumatic and fluid handling applications... |
|
|
|
7 mm Hose Barb Adapter for Quick Coupling |
|
G 1/8 Male x 7mm (9/32”) Hosetail Brass Fitting |
|
|
|
8 mm Hose Barb Adapter for Quick Coupling |
|
G 1/8 Male x 8mm (5/16”) Hosetail Brass Fitting |
|
|
|
10 mm Hose Barb Adapter for Quick Coupling |
|
G 1/8 Male x 10mm (3/8”) Hosetail Brass Fitting |
|
 |
Hose barb tee fitting 4mm x 8mm x 4mm |
 |
Hose barb tee fitting 6mm x 8mm x 6mm |
|
|
Hose brass barb tee fitting 8mm x 8mm x 8mm |
 |
Hose barb tee fitting 10mm x 8mm x 10mm |
-
Product code 3001 - Pressure Diagnostic Transducer PDS500x
- Product code 3005 - Main Compression Adaptor - compression hose
- Product code 3009 - Dual function cable
-
Product code 3110 - Precise Compression Adaptor for PDS500x (optional - not included in the kit)
-
Product code 3111 - Adaptor M10 x 1.0 short reach
-
Product code 3113 - Adaptor M14 x 1.25 short reach
-
Product code 3114 - Adaptor M14 x 1.25 deep reach
- Product code 3115 - Adaptor M16 Ford Triton
-
Product code 3116 - Spark plug grounding clip adaptor
-
Product code 3120 - Thread adaptor G 1/4 male to 1/8-27 NPT female
-
Product code 3121 - Thread adaptor G 1/4 male to R 1/8 female
-
Product code 3122 - Thread adaptor G 1/4 male to G 1/8 female
-
Product code 3123 - Thread adaptor G 1/4 male to G 1/4 male
-
Product code 3124 - Thread adaptor G 1/4 male to 1/4"-18 NPT male
-
Product code 3130 - Mini industrial quick coupling adapter
-
Product code 3131 - G 1/8 BSP Female Mini Quick Coupling
-
Product code 3140 - 7 mm Hose Barb Adapter for Quick Coupling
-
Product code 3141 - 8 mm Hose Barb Adapter for Quick Coupling
-
Product code 3142 - 10 mm Hose Barb Adapter for Quick Coupling
-
Product code 3143 - Hose barb tee fitting 4mm x 8mm x 4mm
-
Product code 3144 - Hose barb tee fitting 6mm x 8mm x 6mm
-
Product code 3145 - Hose brass barb tee fitting 8mm x 8mm x 8mm
-
Product code 3146 - Hose barb tee fitting 10mm x 8mm x 10mm
-
Plastic case with EVA foam